1. Repair a cut/torn vinyl fabric. Ensure the repair areas are clean and free from grease and dirt.

2. Cut a piece of Insane Tape long enough to cover the cut/torn. Peel off the backing film (at the top side of the tape)

3. Align the cut/torn then adhere the Insane Tape piece from one end of the cut

4. Secure the tape over the cut by pressing firmly along the cut/torn with finger

5. Use a smooth but firm object to scrub and press the tape onto the vinyl to make sure all areas are firmly adhered. it is easy to tell by the colour changes if applying on coloured vinyl.

6. Use hot air gun or hair dryer to heat up the repair tape to cure the glue and ensure adhesive is firmly attached, especially all the edges of the patch. Press the tape while it is warm. Don’t overheat and melt the tape. (This is an important step, especially if patching vinyl in low temperature/winter time, and then not going to use it in a hot sunny day right away, uncured adhesive might peel. If this happened, do this step)

7. Repair work done

8. Tape the back side is optional. However, if done on both sides, this repair will last for years.