We Open To Public Mon-Fri 9:30 – 17:00 | Sat 9:30 – 13:00 (except public holidays & long weekends)
To compare the difference, a half shade was fitted to the vehicle to test and show the difference. The result of Sun Shading and Anti Glare are significant.
Suction cup window shades are the worse design ever. Suction cups tend to fall off as a result of heat. Also, it downgrades the look of your vehicle as soon as they are fitted on.
Design to be fitted behind rear row headrest, our shade can be fitted vertically or at an angle. One-piece design, eliminating multiple bars in rear windscreen, elegant and classy.
Roller Rear window shades, regardless of manual or electric type, are complicated to fit and operate, greater chance to be faulty. It is unlikely the rear window shade to be retracted. Our window shade material density is carefully selected to optimize light blocking without sacrificing critical driving vision too much.
The fitting of our rear window sun shades is flexible. It can utilize the baby seat anchor point cap to hold it in place, or stuck in the slot behind the rear seat, or clap the bottom of the shade with the rear row seat.
If none of these work on your car, it will be fitted by using mounting tags like side window shades, adhere a couple of tags above, and a pair at the bottom where the shade lands.
Car models will be gradually added to the following search tool. This is a demanding task and would take a while before the majority of car models are inserted. If you cannot find your sedan model, please send us 2 measurements as stated in the below illustration so that we can make suggestions for you.
Model | Applicable Range |
MS | W =900~1010mm, h = 240~290mm |
MT | W =900~1010mm, h = 290~390mm |
LS | W =1010~1100mm, h = 240~290mm |
LT | W =1010~1100mm, h = 290~390mm |
XS | n/a |
XT | n/a |
iNSANE SALE P/L
ABN: 27 642 359 948
Factory 15, 23A Cook Rd,
Mitcham, VIC 3132 AUSTRALIA