Offroad Caravan Privacy Screen 3.1x2.2m suit 11Ft Awning (2.2m Drop)

Create more shade and privacy beside a high-clearance or off-road caravan.

This RVSUNSHADES off-road caravan privacy screen measures 3.1 m wide × 2.2 m drop and is intended for a compatible 11 ft rollout awning. Its extra-long drop provides improved coverage where a standard privacy screen may finish too far above the ground.

Will this privacy screen fit my awning?

Measure the usable length of your awning’s sail track before ordering. This screen is 3100 mm wide × 2200 mm high and has a dual-keder edge with 5 mm and 7 mm splines, designed for sail tracks measuring approximately 6.9–10 mm.

The suggested awning application is a size guide only. Awning construction and usable track length can vary, so use the measured sail-track length to confirm fit.

Size-selection guide: Measure the usable straight section of your awning sail track, then choose a screen width that fits within that space. Allow for awning hardware and end clearances shown in the illustration.

Why choose this 2.2 m drop caravan privacy screen?

• Extra-long 2.2 m drop: Provides better ground coverage for off-road, lifted and high-clearance caravans.
• 95%+ shade rating: Helps reduce direct sunlight and creates a more private outdoor living area.
• Heavy-duty shade fabric: Made from 220 gsm, 100% virgin HDPE for strength, consistent weave quality and outdoor durability.
• Dual-keder design: Choose the 5 mm or 7 mm spline to suit the compatible sail track on your awning.
• Multiple tie-down points: Stainless-steel D-rings along the sides and lower edge allow flexible positioning and tensioning.
• Reinforced construction: Hemmed edges and reinforced stitching at anchor points support repeated touring use.

Product specifications

Choose your package

Select the required configuration before adding the product to your cart:

• Side Screen Only
• Side Screen + 1 End Walls (2.15m Wide): includes the end-wall quantity stated in the selected option
• Side Screen + 2 End Walls (2.15m Wide): includes the end-wall quantity stated in the selected option

What is included with the side screen?

• 1 × black 3.1 × 2.2 m caravan privacy screen
• Glow-in-the-dark screw tent pegs
• Ground ropes
• Clear zippered PVC carry bag

End walls are included only when the corresponding package option is selected.

How to install the caravan privacy screen

1. Confirm the awning is stable and the selected keder spline matches the sail track.
2. Feed the matching spline into the open end of the awning sail track.
3. Slide the privacy screen along the track until it is positioned where required.
4. Use the side and lower D-rings with the supplied ropes and pegs to position the screen.
5. Apply even, moderate tension. Do not overstretch the fabric or anchor points.

Wind and care guidance

Remove and store the privacy screen during strong or gusty winds. Although HDPE shade fabric allows airflow, a 3.1 × 2.2 m screen can still create significant wind load on the awning, fabric and D-ring anchor points.

Do not leave the screen flapping or overtensioned. Allow it to dry before folding, and store it in the supplied carry bag when not in use.

RVSUNSHADES caravan shade solutions

Designed for Australian touring conditions, this heavy-duty off-road caravan privacy screen combines a 2.2 m drop, dual-keder fitment and practical tie-down points for shade, privacy and flexible campsite setup.

Product images are for reference. Confirm the listed dimensions and your awning’s usable sail-track length before purchase.